Skip to main content

Cisco CCNP Troubleshooting IP Networks 300-135

Advanced26 Hours 7 Minutes62 Course Videos46 Test Questions

$99.00

Cisco CCNP Troubleshooting IP Networks 300-135 is an online course for network engineers who find and fix faults on Cisco networks. It runs for 26 hours 7 minutes over 62 videos, with trouble ticket practice.

  • Login details sent straight after payment
  • Self-paced. Study on any device
  • StemBoss Certificate of Completion
  • 14-day refund promise

Secure checkout. Pay by card, Apple Pay or Google Pay.

Download the course outline (PDF)

Cisco CCNP Troubleshooting IP Networks 300-135 is an online course for network engineers who need to find and fix faults on Cisco routed and switched networks. It follows the Cisco 300-135 TSHOOT exam, which was part of the CCNP Routing and Switching certification. The course runs for 26 hours 7 minutes over 62 videos, with 46 test questions.

What you will learn

  • Use IOS commands and remote tools to gather fault data
  • Troubleshoot Catalyst switches, VLANs, trunks and Spanning Tree
  • Fix EtherChannel and inter-VLAN routing problems
  • Resolve switch security and first-hop redundancy faults with HSRP and VRRP
  • Troubleshoot IPv4 and IPv6 addressing, DHCP and NAT
  • Fix access control list and prefix list problems
  • Troubleshoot RIP, EIGRP, OSPF and BGP
  • Check redistribution, route maps, policy-based routing and management access

Course outline

  1. Introduction to Cisco troubleshooting: methods, IOS commands and remote data gathering
  2. Troubleshooting switches: Catalyst switches and TCAM
  3. Troubleshooting VLANs and trunking: common faults plus a trouble ticket
  4. Troubleshooting STP and EtherChannel: port settings and bundled links
  5. Troubleshooting inter-VLAN routing: including Layer 3 EtherChannel
  6. Troubleshooting switch security: security features and trouble tickets
  7. Troubleshooting first-hop redundancy: HSRP and VRRP
  8. Troubleshooting IPv4 addressing: DHCP and NAT faults
  9. IPv6 addressing: IPv6 address options
  10. Troubleshooting ACLs and prefix lists: IPv4 and IPv6 filters
  11. Troubleshooting GRE and basic routing: IPv4 and IPv6 routing and GRE tunnels
  12. Troubleshooting RIPv2 and RIPng: distance vector faults
  13. Troubleshooting EIGRP: EIGRP for IPv4 and IPv6
  14. OSPF and OSPFv3: OSPF faults with trouble tickets
  15. Troubleshooting route maps and PBR: policy-based routing
  16. Troubleshooting redistribution: checking and fixing route sharing
  17. Troubleshooting BGP: BGP setup and faults
  18. Management protocols and tools: including SPAN and RSPAN
  19. Troubleshooting management access: getting back into devices

Who this course is for

  • Network engineers and administrators who support Cisco networks
  • Network operations centre staff who handle live faults
  • Technical support engineers who escalate network issues
  • Learners working towards Cisco professional level skills

Before you start

This is a professional level course. You should already be at ease setting up Cisco routers and switches at CCNA level, including VLANs, OSPF and EIGRP. Taking Cisco 300-115 and 300-101 first gives you the setup knowledge that this course builds on.

About the 300-135 exam

The 300-135 TSHOOT exam checked your ability to plan and carry out regular maintenance and to troubleshoot complex enterprise routed and switched networks. Cisco issued it as one of the exams for CCNP Routing and Switching, alongside 300-101 ROUTE and 300-115 SWITCH.

Cisco retired 300-135 on 23 February 2020 when it moved to the CCNP Enterprise track. The structured fault-finding method taught here still applies on any Cisco network.

Jobs this course supports

  • Network Engineer
  • Network Administrator
  • Technical Support Engineer
  • Network Operations Centre (NOC) Technician
  • IT Support Specialist
  • Systems Engineer

Skill level

Advanced
Duration

26 Hours 7 Minutes
Videos

62 Course Videos
Questions

46 Test Questions
Certification

CCNP Routing and Switching (retired)
Exam code

300-135
Certification body

Cisco
Prerequisites

Confident with Cisco router and switch setup at CCNA level.
Best for

Network engineers, network administrators, NOC technicians, technical support engineers
Topics covered

IOS troubleshooting tools, VLANs and trunking, STP and EtherChannel, HSRP and VRRP, IPv4 and IPv6, ACLs, EIGRP, OSPF and BGP
Format

Online video lessons, self-paced
Language

English
Closed captions

Yes
Certificate

StemBoss Certificate of Completion

What is inside this course

19 modules and 62 lessons. Here is the full outline.

Module 1: Introduction to Cisco Troubleshooting5 lessons
  1. Introduction
  2. Troubleshooting And Maintenance
  3. IOS Troubleshooting Commands
  4. Remote Data Gathering
  5. Introduction To Graphical Troubleshooting Tools And Review
Module 2: Troubleshooting Switches2 lessons
  1. Troubleshoot Catalyst Switches
  2. Troubleshoot TCAM
Module 3: Troubleshooting VLANS and Trunking4 lessons
  1. Troubleshooting VLANs And Trunking-Part1
  2. Troubleshooting VLANs And Trunking-Part2
  3. Troubleshooting VLANs And Trunking-Part3
  4. Trouble Ticket 1 VLANS
Module 4: Troubleshooting Spanning Tree Protocol, EtherChannel4 lessons
  1. Spanning Tree Protocol
  2. STP Port Configuration
  3. Ether Channel
  4. Trouble Ticket 2-Trunking
Module 5: Troubleshooting Inter­VLAN Routing and Layer 3 EtherChannel2 lessons
  1. Troubleshooting Inter-VLAN Routing
  2. Troubleshooting Layer 3 Ether Channel
Module 6: Troubleshooting Switch Security Features4 lessons
  1. Troubleshoot Switch Security-Part1
  2. Troubleshoot Switch Security-Part2
  3. Trouble Ticket 3-Switch Security-Part1
  4. Trouble Ticket 3-Switch Security-Part2
Module 7: Troubleshooting First­Hop Redundancy Protocols4 lessons
  1. HSRP
  2. VRRP
  3. Questions
  4. Trouble Ticket 4
Module 8: Troubleshooting IPv4 and IPv4 Addressing4 lessons
  1. IPv4 Addressing DHCPNAT-Part1
  2. IPv4 Addressing DHCPNAT-Part2
  3. Trouble Ticket 5
  4. Trouble Ticket 6
Module 9: IPv6 Addressing and Addressing Technologies1 lessons
  1. IPv6 Addressing Options
Module 10: Troubleshooting IPv4 and IPv6 ACLs and Prefix Lists4 lessons
  1. IPv4 ACLs
  2. Prefixlists IPv6 ACLs
  3. Trouble Ticket Access Control List1
  4. Trouble Ticket Access Control List2
Module 11: Troubleshooting GRE and Basic Routing Tunnels4 lessons
  1. IPv4 Routing-Part1
  2. IPv4 Routing-Part2
  3. IPv6 Routing
  4. GRE Tunnels
Module 12: Troubleshooting RIPv2 and RIPng2 lessons
  1. RIPv2
  2. RIPng
Module 13: Troubleshooting EIGRP4 lessons
  1. EIGRP
  2. EIGRP For IPv6
  3. Trouble Ticket 1
  4. Trouble Ticket 2
Module 14: OSPF and OSPFv36 lessons
  1. OSPF-Part1
  2. OSPF-Part2
  3. OSPFv3
  4. Trouble Ticket 1
  5. Trouble Ticket 2
  6. Trouble Ticket 3
Module 15: Troubleshooting Route Maps and Policy Based Routing1 lessons
  1. Route Maps And Policy Based Routing
Module 16: Troubleshooting Redistribution2 lessons
  1. Verifying Redistribution Configuration
  2. Troubleshooting Redistribution With Route Maps
Module 17: Troubleshooting BGP5 lessons
  1. BGP Overview
  2. BGP Configuration-Part1
  3. BGP Configuration-Part2
  4. Trouble Ticket 1
  5. Trouble Ticket 2
Module 18: Troubleshooting Management Protocols and Tools2 lessons
  1. Troubleshooting Management Protocols And Tools
  2. SPAN And RSPAN
Module 19: Troubleshooting Management Access2 lessons
  1. Management Access Troubleshooting
  2. Conclusion

Your learning path

Where Cisco CCNP Troubleshooting IP Networks 300-135 fits. Build your skills one step at a time.

Take firstCisco CCNA 200-301
You are hereCisco CCNP Troubleshooting IP Networks 300-135
Next stepCisco Routing and Switching 300-115Next stepCisco IP Routing - 300-101Next stepCisco CCNP - 350-401: Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Frequently asked questions

Can I still take the Cisco 300-135 exam?

No. Cisco retired 300-135 TSHOOT on 23 February 2020. The course still builds strong fault-finding skills for Cisco routed and switched networks.

What are the trouble tickets in this course?

They are worked fault scenarios. You see a broken network, gather data and fix the problem, which mirrors real support work.

Which routing protocols are covered?

The course covers RIPv2, RIPng, EIGRP, OSPF, OSPFv3 and BGP, plus redistribution, route maps and policy-based routing.

Does it include IPv6?

Yes. You troubleshoot IPv6 addressing, IPv6 access lists and IPv6 versions of EIGRP, OSPF and RIP.

What should I study after this course?

Cisco's current enterprise track is a good next step. On StemBoss, the 350-401 ENCOR and 300-410 ENARSI courses follow on well.

Do I get a certificate?

Yes. You get a StemBoss Certificate of Completion when you finish the course.

Can I get a refund?

Yes, within 14 days if you have completed less than 20% of the course. See our refund policy for details. Read the refund policy.

Related courses

$99.00
Buy course