Skip to main content

Cisco IP Routing – 300-101

Advanced17 Hours 40 Minutes48 Course Videos247 Test Questions

$99.00

Master advanced IP routing with this Cisco 300-101 ROUTE course from the CCNP Routing and Switching track. Configure EIGRP, OSPF, BGP and IPv6 in 17 hours 40 minutes of video.

  • Login details sent straight after payment
  • Self-paced. Study on any device
  • StemBoss Certificate of Completion
  • 14-day refund promise

Secure checkout. Pay by card, Apple Pay or Google Pay.

Download the course outline (PDF)

Cisco IP Routing (300-101) is an advanced course on the routing protocols that run enterprise networks. It follows the Cisco 300-101 ROUTE exam from the CCNP Routing and Switching track and suits network engineers who already know CCNA level routing. You get 17 hours 40 minutes of self-paced training across 48 video lessons.

What you will learn

  • Review routing basics, route selection and IP subnetting
  • Configure EIGRP, including stub routing, summarisation and load balancing
  • Secure EIGRP routes with authentication
  • Plan and configure IPv6 addressing and EIGRP for IPv6
  • Set up RIPng for IPv6 networks
  • Configure OSPF and build the link state database
  • Use OSPF path selection, summarisation, stub areas and authentication
  • Configure OSPFv3 and basic route redistribution
  • Configure BGP, BGP path selection and BGP authentication
  • Troubleshoot and tune routing across a network
  • Set up basic EIGRP and OSPF configurations from scratch

Course outline: Cisco 300-101

  1. Plan and design: a review of routing basics, route selection, switching versus routing, IP subnetting and IP address classes.
  2. EIGRP: topology tables, stub routing, summarisation, load balancing, named configuration and authentication.
  3. IPv6: IPv6 addressing, basic setup and EIGRP for IPv6.
  4. OSPF: the link state database, path selection, summarisation, stub areas, authentication, OSPFv3 and redistribution.
  5. BGP: BGP basics, path selection, authentication and configuration.
  6. Course review: a hands-on recap of EIGRP, OSPF, IPv6 and BGP, with basic configurations of each.

Who this course is for

  • Network engineers and administrators who manage routed networks
  • IT professionals working towards a CCNP level skill set
  • CCNA holders who want deeper routing knowledge
  • People moving into network engineering roles
  • Network administrators who manage networks across several sites
  • Students and aspiring network engineers

Before you start

This is an advanced course. You should already understand CCNA level routing, IP addressing and subnetting. Time spent with Cisco routers, real or virtual, will help you follow the configuration lessons. Make sure you can subnet quickly, because the course starts with a review and then moves fast. Build a small lab and repeat each configuration demo yourself. Hands-on practice is the best way to remember how each protocol behaves.

About the 300-101 exam

The 300-101 ROUTE exam was issued by Cisco as part of the CCNP Routing and Switching certification. It tested your ability to plan, set up and fix advanced IP routing with EIGRP, OSPF, BGP and IPv6. Cisco retired this exam in February 2020 when it launched its new certification program. Today, advanced enterprise routing is covered by the CCNP Enterprise track, including the 300-410 ENARSI exam. EIGRP, OSPF and BGP are still used in enterprise networks around the world, so the skills in this course stay useful.

Jobs this course supports

  • Network Engineer
  • Senior Network Administrator
  • Network Architect
  • Systems Engineer
  • Technical Support Engineer
  • IT Infrastructure Manager

Skill level

Advanced
Duration

17 Hours 40 Minutes
Videos

48 Course Videos
Questions

247 Test Questions
Certification

CCNP Routing and Switching (ROUTE)
Exam code

300-101
Certification body

Cisco
Prerequisites

CCNA level routing knowledge, including IP addressing and subnetting.
Best for

Network engineers, network administrators, systems engineers, aspiring network architects
Topics covered

Routing fundamentals and subnetting, EIGRP, IPv6 and RIPng, OSPF and OSPFv3, BGP, Route redistribution, Routing protocol authentication
Format

Online video lessons, self-paced
Language

English
Closed captions

Yes
Certificate

StemBoss Certificate of Completion

What is inside this course

6 modules and 48 lessons. Here is the full outline.

Module 1: Plan And Design7 lessons
  1. Introduction
  2. Review Routing Fundamentals
  3. Review Route Selection
  4. Review Switching Versus Routing
  5. Review IP Subnetting
  6. Review How To Subnet
  7. Review IP Address Classes
Module 2: EIGRP Enhanced Interior Gateway Routing Protocol12 lessons
  1. Plan And Design-Part1
  2. Plan And Design-Part2
  3. EIGRP Config
  4. Configuring RIPng
  5. Building EIGRP Topology Table
  6. EIGRP Stub Routing
  7. EIGRP Summarization
  8. EIGRP Load Balancing
  9. Discovering Main EIGRP Configuration
  10. Implementing EIGRP Through Name Config
  11. Configure EIGRP Authentication
  12. Configure Authentication For EIGRP Routes
Module 3: IPv66 lessons
  1. Introduction To IPv6-Part1
  2. Introduction To IPv6-Part2
  3. IPv6 Addressing
  4. Basic IPv6 Configuration
  5. EIGRP For IPv6
  6. Configure And Optimize EIRGP For IPv6
Module 4: OSPF13 lessons
  1. lntroduction To OSPF-Part1
  2. lntroduction To OSPF-Part2
  3. lntroduction To OSPF-Part3
  4. Configure OSPF
  5. Building The Link State Database
  6. OSPF Path Selection
  7. OSPF Route Summarization
  8. OSPF Stub Areas
  9. Implement OSPF
  10. Optimize OSPF
  11. OSPF Authentication Configuration
  12. Configure OSPFV3
  13. Basic Redistribution
Module 5: Border Gateway Protocol BGP6 lessons
  1. Introduction To BGP
  2. BGP Specifics
  3. Basic BGP
  4. BGP Path Selection
  5. Configure BGP Authentication
  6. Configure BGP
Module 6: Course Review4 lessons
  1. Configure Basic EIGRP
  2. Basic OSPF Configuration
  3. Summary Of-EIGRP-OSPF-IPv6-BGP
  4. Conclusion

Your learning path

Where Cisco IP Routing - 300-101 fits. Build your skills one step at a time.

Take firstCisco CCNA 200-301
You are hereCisco IP Routing - 300-101
Next stepCisco Routing and Switching 300-115Next stepCisco CCNP Troubleshooting IP Networks 300-135Next stepCisco 300-410 ENARSI - Implementing Cisco Enterprise Advanced Routing and Services

Frequently asked questions

Can I still take the Cisco 300-101 exam?

No. Cisco retired the 300-101 ROUTE exam in February 2020. The routing skills it covers are now part of the CCNP Enterprise track.

Which routing protocols does this course cover?

It covers EIGRP, OSPF and OSPFv3, BGP and RIPng, plus EIGRP for IPv6 and basic route redistribution.

Does the course include IPv6?

Yes. A full module covers IPv6 addressing, basic setup and running EIGRP over IPv6.

What should I study after this course?

The Cisco 300-410 ENARSI course is the current advanced routing path. It builds on many of the same protocols.

Is this course suitable for beginners?

No. It assumes CCNA level knowledge. If you are new to networking, start with the Cisco CCNA 200-301 course.

Do I get a certificate?

Yes. You get a StemBoss Certificate of Completion when you finish the course.

Can I get a refund?

Yes, within 14 days if you have completed less than 20% of the course. See our refund policy for details. Read the refund policy.

Related courses

$99.00
Buy course